Skip to main content

300x250 Ads

PROGRAMMABLE INTERRUPT CONTROLLER-8259A

By Ashik
8259A
PROGRAMMABLE INTERRUPT CONTROLLER


  • 8086, 8088 Compatible
  • MCS-80, MCS-85 Compatible
  • Eight-Level Priority Controller
  • Expandable to 64 Levels
  • Programmable Interrupt Modes
  • Individual Request Mask Capability                              
  • Single a5V Supply (No Clocks)
  • Available in 28-Pin DIP and 28-Lead
    PLCC Package
    (See Packaging Spec., Order #231369)
  • Available in EXPRESS  
  •  Standard Temperature Range
  • Extended Temperature Range
   The Intel 8259A Programmable Interrupt Controller handles up to eight vectored priority interrupts for the CPU.
It is cascadable for up to 64 vectored priority interrupts without additional circuitry. It is packaged in a 28-pin
DIP, uses NMOS technology and requires a single a5V supply. Circuitry is static, requiring no clock input.
The 8259A is designed to minimize the software and real time overhead in handling multi-level priority interrupts.
It has several modes, permitting optimization for a variety of system requirements.
The 8259A is fully upward compatible with the Intel 8259. Software originally written for the 8259 will operate
the 8259A in all 8259 equivalent modes (MCS-80/85, Non-Buffered, Edge Triggered).



Labels:

Comments

Post a Comment

Popular posts from this blog

Armature Winding ,Pole Pitch, Coil Span, Commutator Pitch

By Ashik
Now we are going to discuss about armature winding in details. Before going through this section, we should understand some basic terms related to armature winding of dc generator . Pole Pitch Definition of Pole Pitch The pole pitch is defined as peripheral distance between center of two adjacent poles in dc machine. This distance is measured in term of armature slots or armature conductor come between two adjacent pole centers. This is naturally equal to the total number of armature slots divided by number of poles in the machine. If there are 96 slots on the armature periphery and 4 numbers of poles in the machine, the numbers of armature slots come between two adjacent poles centers would be 96/4 = 24. Hence, the pole pitch of that dc machine would be 24. As it is seen that, pole pitch is equal to total numbers of armature slots divided by total numbers of poles, this can alternatively referred as armature slots per pole . Coil Span or Coil Pitch Coil of ...
Post a Comment
Read more

Transformer

By Ashik
 A transformer is a static electrical device that transfers energy by inductive coupling between its winding circuits. The transformer is one of the simplest of electrical devices. Its basic design, materials, and principles have changed little over the last one hundred years, yet transformer designs and materials continue to be improved. Transformers are essential in high voltage power transmission providing an economical means of transmitting power over large distances. The simplicity, reliability, and economy of conversion of voltages by transformers was the principal factor in the selection of alternating current power transmission in the "War of Currents" in the late 1880's. In electronic circuitry, new methods of circuit design have replaced some of the applications of transformers, but electronic technology has also developed new transformer designs and applications. Transformers come in a range of sizes from a thumbnail-sized coupling transfo...
Post a Comment
Read more

Principles of Electronics

By Ashik
 Principles of Electronics  By- V.K. Mehta, Rohit Mehta  
2 comments
Read more

Add